The high power combiner OM10C is designed for all short wave amateur bands from 1.8 to 29.7 MHz and maximum 10kW PEP output power. Frequency coverage: 1.8 – 29.7 MHz continuous Power rating: 10 kW PEP or continuous carrier into a matched load (VSWR below 1.2:1). Reduce the output at increased VSWR, linearly down to…
DetailsFEATURES: Five inch (5”) (108x65mm) high resolution color display, 800×480 pixels and 24-bits colors. The final stage uses field effect (MOSFET) transistors type BLF188 from NXP, designed to withstand high mismatch (SWR) at the output and intended for operation in aerospace, industrial, mobile, and radio broadcast applications. Compatible with all transceiver models available on the…
DetailsSpecification: 300W • -60dB Powerful: solidc 1.5kW in on on all modes. Very Light: about 10 kgs (about 22 lbs). Very Small: H 12, W 28, D 36 cm. (4.72″ X 11.2″ X about 17″, connectors included). Wide Frequency Coverage: 1.8 mHz to 54 mHz, including WARCs. Where permitted: 60m. full power and 300W on…
DetailsRF Sensing 1000 Watt Amplifier covering 160m to 6m bands with LCD touch-screen display to control the amplifier. Output Power 1000 Watts PEP CW ICAS Frequency range 1.8 to 54 MHz Color Touch Screen allows access to all functions Output 3 RF SO-239 ALC Exciter Power Control Gain 14 db RF Sensing Auto Band Switching…
DetailsPhoto by Elecraft New KPA1500 solid-state amplifier won’t take over your entire desktop: it’s just 4.5 x 13.5 x 11.5” (HWD; 11.5 x 34 x 29 cm). The lightweight companion power supply can be placed on the floor or in any other convenient location. The KPA1500 was designed with the serious operator in mind. Its…
Details
